RFID parking system

UHF RFID and license plate recognition integrated machine /LED screen KT-ZYSB35

UHF RFID identification technical parameters

Card reader-tag protocol: ISO18000-6B, EPC Class1 Gen2 (ISO18000-6C)

Antenna interface: integrated antenna, horizontal polarization

RF band: UHF, supports China (920-925MHz), optional Americas (902-928MHz) / Europe (865-868MHz) / other country frequency bands

RF mode: fixed frequency mode/broad spectrum frequency hopping

Identification range: up to 3 meters, depending on the use environment and electronic tag

RF output: less than 32dBm, in line with radio management regulations

Interface support: MQTT communication, 485 communication, Wiegand communication

TCP/IP communication: 1 way

485 communication: 1 way

Wiegand communication: 1 channel, input or output through jumper

Gate opening signal: 2 channels

Support equipment: barrier gates, advertising doors, passage gates, telescopic doors, roller shutters, sliding doors, door locks, etc.

IO input: 1 channel

Display: LED display

Voice broadcast: support

Working voltage: 12V DC

Working current: 500mA

Working temperature: -30～70℃

Working humidity: 15～95%

Product size: 1385*245*120MM

License plate recognition camera technical parameters

Recognition algorithm

  Capture rate: ≥99.9%

  Recognition rate: ≥99.8%

  Adaptable speed: 0-40 km/h

  License plate recognition types: ordinary blue plates, single and double-layer yellow plates, new energy, single and double-layer police cars, new armed police, single and double-layer military plates, new embassies, coach vehicles, Hong Kong and Macao mainland license plates, emergency license plates, civil aviation, special license plates, etc.

  License plate recognition features: license plate number, color, width, confidence

  License plate anti-counterfeiting: supports abnormal license plate (photography and printing with mobile phone) alarms, accuracy rate 9≥5%

  Unlicensed vehicle triggering: Supports unlicensed vehicle video triggering, with an accuracy of 95%

  Car model recognition: Supports 7 car model recognitions (cars, SUVs, MPVs, minibuses, large buses, minivans, large

truck), accuracy 98%

  License plate whitelist: Supports accurate and intelligent fuzzy matching of whitelist license plate rules

  Intelligent calibration: Supports intelligent calibration of license plate number, license plate type and color accurately or in a wildcard manner

imaging  

  Basic configuration: Embedded VZ intelligent ISP algorithm, intelligent optimization of dimming algorithm, intelligent adaptation to complex scenes

  Basic parameters (brightness/contrast/saturation/sharpness/image flip/exposure time, etc.) can be set individually

  Video compression standard: H.264/H.265

  Video resolution: 640*360, 704*576, 1280*720, 1920*1080, 2960*1664

  Compression output bit rate: 512Kbps~5000Kbps

  Frame rate: 1~25 frames, default 25 frames

communication

  Communication protocol: SDK, ONVIF, HTTP, MQTT, RTSP, TCP/IP, UDP, RS485, NTP

  FTP upload pictures: Supported, upload captured pictures to the server through FTP

  VPN virtual private network: supports the establishment of virtual private network through OpenVPN

  HTTP push: Supported, supports uploading recognition results and offline retransmission

  MQTT push: Supported, supports uploading recognition results and offline retransmission

  Dynamic domain name: Supports docking with 3322 dynamic domain name service

  UPNP port mapping: support, automatically map HTTP/RSTP communication port

Networking

  Offline networking: no host computer or server is required, and operational networking is automatically implemented between cameras

  Parking lot management: supports the establishment of multiple parking lots and scene-based management of multiple cameras

  Whitelist: Cooperate with strategies to meet vehicle hierarchical management

  Linkage management: 3 auxiliary cameras (including license plate cameras and lane surveillance cameras) can be added to the same main device

manage

  Management protocol: PC\mobile management, PC management tools, SDK development kit, HTTP push

  Cloud management: Remotely manage a single camera, centrally manage multiple cameras through accounts, and support cloud SDK development management platform

imaging

  Sensor: 5MP high performance CIS

  Resolution: 2960(H) x 1664(V)

  Low illumination: 0.1LUX color (white light)

  Electronic shutter: 0-1ms or customized

  Lens: Standard 6mm fixed focus lens

  Interface: M12

Image indicators

  Image settings: brightness, contrast, saturation, image flip, exposure time, etc.

  Noise reduction: supports 2D/3D noise reduction

  Wide dynamic range: supported

Interface button

  Network interface: 1 channel 10/100Mbps adaptive RJ45 port

  IO output: 2 channels

  IO input: 2 channels

  RS485: 1 way

  TF card slot: 1 TF card slot, supporting a maximum capacity of 256G

  Reset button: 1 channel Reset button

System light

  System light: The device's status light flashes to indicate that the system is working normally. If it is always on or off, it indicates that it is starting up or abnormal. If the device's status light flashes, it indicates that the system is working normally. If it is always on or off, it indicates that it is starting up or it is abnormal.

reliability index

  Temperature: Operating temperature: -30℃~70℃

  Static electricity: contact 6KV, air 8KV；

  Surge: 10/70 common mode 4KV, differential mode 2KV 8/20 common mode 2KV, differential mode 2KV

  Anti-vibration: national standard

  Power supply: 12V DC

  Power consumption Power consumption ≤3W

  Protection: IP65:-