Face recognition machine

8inch face Recognition all-in-one machine KT- FR012

Technical parameters

Processor: Dual-core ARM Cortex-A7

Operating system: Embedded Linux operating system

Storage: 1GB RAM + 8GB eMMC 

Viewing angle: Vertical Viewing angle: 30°； Horizontal viewing angle: 30°

Imaging device: 1/2.8" Progressive Scan CMOS

Lens: 6mm

Card swiping module (optional): 13.56MHz, supports Mifare S50, S70 cards, ultralinght cards, NTAG cards, DESFire D21, D41, D81, non-contact CPU cards

4G module (optional): supports LTE-FDD, LTE-TDD, DC-HSPA+, WCDMA, EDGE, GPRS and other network standards, with a maximum downlink rate of 160Mbps and a maximum uplink rate of 60Mbps

Wifi module (optional): 2.4GHz frequency band, IEEE802 b/g/n protocol； 5GHz frequency band, IEEE802 a/n/ac protocol

Speaker: standard, voice playback content can be customized

Recognition height: 1.2~2.2 meters, angle adjustable

Recognition distance: 0.5~1.5 meters, variable depending on the lens

Recognition time: less than 0.3 seconds

Recording capacity: 80,000 snapshot records

Face capacity: 30,000

Screen brightness: ≥400 cd/m2

Network interface: 1 RJ45 10M/100M adaptive Ethernet port, customizable Gigabit network port

Wiegand interface: 1 Wiegand interface output, 1 Wiegand interface input

Door sensor interface: 1 channel door sensor interface

Door opening interface: 1 way door opening interface

Door lock interface: 1-way door lock interface

Communication interface: 1 channel 485 communication interface

Camera: Binocular camera, visible light and near infrared, supports living body detection

Effective pixels: 2.1 million effective pixels, 1920*1080

Minimum illumination: color 0.01Lux @F1.2 (ICR); black and white 0.001Lux @F1.2 (ICR)

Signal-to-noise ratio: ≥50db (AGC OFF)

Wide dynamic range: 120db, ISP algorithm partial exposure of face

Video encoding: H.265 Main Profile encoding/H.264 BP/MP/HP encoding/MJPEG encoding

Working temperature: -30℃ - +60℃

Working humidity: 0~90% relative humidity, no condensation

Salt spray level: Rp6 or above

Antistatic: contact ±6KV, air ±8KV

Power supply: DC12V/2A

Anti-riot level: IK06

Protection level: IP66

Equipment power: 20W(MAX)

Equipment size: 252 (length) * 136 (width) * 26 (thickness) mm

Features

Support binocular live body detection

Unique live face recognition algorithm, accurately recognizes faces, face recognition time is less than 0.3s

Mean running time between failures MTBF＞50000H

Supports face tracking and exposure of people moving in strong backlight environments

Rich interface protocols, supporting SDK and HTTP protocols on multiple platforms such as Linux/Windows

Using Linux operating system, the system stability is better

Supports 30,000+ face comparison libraries and 80,000 recognition records

Supports TF card expansion storage, pictures can be stored continuously for 1 year, videos can be stored continuously for a week or more

Working temperature: -30℃- +60℃

Outdoor IP66 waterproof and dustproof

The device supports local login to manage, query, and configure the device.

Rich hardware interfaces (I/O, WG26, WG34, RJ45, door sensor, door opening, door lock, RS485)

8-inch IPS full-viewing HD display, no smearing or delay in images

Automatic gain and automatic white balance allow the true color of the image to be restored naturally

Built-in black light level sensor dedicated for video surveillance, more accurate low-light recognition

3D noise reduction and fog penetration technology make monitoring images under low illumination clearer and more detailed

Support partial blocking of video area

Support ROI encoding

Automatic white balance, manual white balance available

Support 2D noise reduction and 3D noise reduction

Supports video brightness, contrast, hue, saturation, and gamma adjustment

Support setting the maximum automatic exposure time

Supports face intelligent exposure and face intelligent enhancement settings